EG
I
F
D
E
DECLARATION OF CONFORMITY
This product is marked as it satisfies Directives:
– Low voltage no. 2006/95/CE.
– Electromagnetic compatibility no. 89/336 ECC, 92/31 EEC and 93/68 EEC.
This declaration will become void in case of misuse and/or non observance though partial of manufacturer's installation
and/or operating instructions.
Power Supply:
220 - 240 V ~ 50 Hz
1.Standard screwdriver
2.Phillips head screwdriver
3.Knife or wire stripper
4.Tape measure
5.Level
6.Sabre saw or key hole saw
7.Hacksaw
8. Core bits ø 5
1
9.Hammer
10.Drill
11. Tube cutter
12.Tube flaring tool
13.Torque wrench
14.Adjustable wrench
15.Reamer (for reburring)
16.Hex. key
Tools required for installation (not supplied)
OPERATING LIMITS
L
Cooling Maximum conditions
Outdoor temperature
:
43°C D.B.
Room temperature :
32°C D.B. / 23°C W.B.
L
Cooling Minimum conditions
Outdoor temperature
:
–15°C D.B.
Room temperature :
10°C D.B. / 6°C W.B.
L
Heating Maximum conditions
Outdoor temperature
:
24°C D.B. / 18°C W.B.
Room temperature :
27°C D.B.
L
Heating Minimum conditions
Outdoor temperature
:
–15°C D.B.
Room temperature :
5°C D.B.
Model Combinations
Combine indoor and outdoor units only as listed below.
Indoor Units
Outdoor Units
MRAF99R5I--
GRF99R5I--
GRF98R5I--
MRAF129R5I--
GRF129R5I--
GRF128R5I--
37.4255.038.0 05/2009
F-GAS Regulation (EC) No. 842/2006
Do not vent R410A into atmosphere: R410A is a
fluorinated greenhouse gas, covered by Kyoto Protocol,
with a Global Warming Potential (GWP) = 1975.
INSTALLATION INSTRUCTIONS
- Split system air conditioner -
3742550380-I-TEC-MRAF-IMQ 8-05-2009 12:56 Pagina 1/1
