Toyotomi KENTO Series, User Manual

Page: 39 / 48

39
GB
DEHUMIDIFIER
If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use
detergent, scouring pads, chemically treated dust cloths, gasoline, benzene,
thinner, or other solvents, as these can scratch and damage the tank and
cause water leakage
When replacing the drainage tank, press the tank fi rmly
into place with both hands. If the tank is not positioned
properly, the “TANK FULL” sensor will be activated, and
the dehumidi
fi er will not operate.
Continuous Water Drainage
The unit features a continuous drainage port .Using a plastic pipe (with an
inner diameter of 10mm) inserts into drain hole (on intermediate plate), reach
out from side of water tank, install it in place, and arrange the drain pipe.
The water in the drainage tank can be continuously drained out from the
continuous port on the unit.
ATTENTION! In drainage tank may continue to be draining from the internal
cascading by the improper installation of the drainage pipe & from too extreme
humidity at the place is the dehumidi
fi er located