Toyotomi CTG-228BRM, User Manual

Page: 17 / 124

17
GB
unit will enter into «Manual Dehumidi fi cation» mode. Both humidity (40~80%)
and temperature can be adjusted independently. (Setting method: increase
by 5% from 40%-80%, and adjust by pressing «+» and «-» buttons). Under
this dehumidi
fi cation mode, set humidity will appear fi rst for 5s and then set
temperature.
By pressing «Humidity Control» button on remote controller twice, the unit
will enter into «Smart Dehumidi
fi cation» mode, working at optimal comfortable
humidity range under different temperatures according to the pre-set program.
Under this dehumidi
fi cation mode, « » icon will appear on remote controller
and «AO» appears on the display of indoor units for 5s. Humidity control is not
adjustable while temperature is.
Under «Dry Mode»:
By pressing «Humidity Control» button « » on remote controller once, the
unit will enter into «Manual Dehumidi
fi cation» mode. Both humidity (30~70%)
and temperature can be set independently. (Setting method: increase by
5% from 30%-70%, and adjust by pressing «+» and «-» buttons). Humidity
is adjustable while temperature is not. Under this dehumidi
fi cation mode, set
humidity will appear. By pressing «Humidity Control» button « » on remote
controller twice, the unit will enter into «Continuous Dehumidi
fi cation» mode,
keeping dehumidi fi cation until room temperature reach below 16ºC degrees.
Under this dehumidi fi cation mode, «CO» icon will appear on both remote
controller and display of indoor units. Both humidity control and temperature
can NOT be adjusted.
NOTE
• The air conditioner is mainly used for controlling the temperature, while
the humidity control is the auxiliary function. The humidity will be affected
by the factors such as indoor and outdoor environment, degree of indoor
sealing and indoor
fl ow.
• When the set humidity is higher than current atmospheric humidity, the set
humidity can’t be reached.
9 button
Press this button can select left & right swing angle. Fan blow angle can be
selected circularly as below:
no display
(stops at current
position)