Toyotomi CTG-228BRM, User Manual

Page: 26 / 124

26
GB
3. Install fi lter
Insert the buckles (4 places) under the fi lter into the holes of the device.
Make sure that the Filter is correctly installed in the device.
Then press the buckles (two places) above the
fi lter into the holes of the
device.
WARNING
§
The fi lter should be cleaned every three months. If there is much dust in
the operation environment, clean frequency can be increased.
§
After removing the fi lter, do not touch fi ns to avoid injury.
§
D Ο ΝΟΤ use fi re or hair dryer to dry the fi lter to avoid deformation or fi re
hazard.
§
DO NOT clean the healthy fi lters with water. These fi lters must be cleaned
only with a vacuum cleaner or simply by shaking them on the balcony
NOTE: Checking before use-season
1. Check whether air inlets and air outlets are blocked.
2. Check whether air switch, plug and socket are in good condition.
3. Check whether
fi lter is clean.
4. Check whether mounting bracket for outdoor unit is damaged or corroded.
If yes, please contact dealer.
5. Check whether drainage pipe is damaged.
NOTE: Checking after use-season
1. Disconnect power supply.
2. Clean
fi lter and indoor unit’s panel.
3. Check whether mounting bracket for outdo or unit is damaged or corroded.
If yes, please contact dealer.
Notice for recovery
1. Many packing materials are recyclable materials. Please dispose them in
appropriate recycling unit.