Toyota Venza 2021, Manual

Page: 133 / 548

131
3-2. Opening, closing and locking the doors
3
Before
driving
3-2.Opening, closing and locking the doors
■
Using the entry function
Carry the electronic key to
enable this function.
1
Grip the driver’s door handle
to unlock the door. Holding
the driver’s door handle for
approximately 2 seconds
unlocks all the doors.
Grip the front passenger’s
door handle or rear door han-
dle (some models) to unlock
all the doors
*
.
Make sure to touch the sensor on
the back of the handle.
The doors cannot be unlocked for 3
seconds after the doors are locked.
*
: The door unlock settings can be
changed. (

P.131)
2
Touch the lock sensor (the
indentation on the surface of
the door handle) to lock the
doors.
Check that the door is securely
locked.
■
Using the wireless remote
control
1
Locks all the doors
Check that the door is securely
locked.
2
Unlocks all the doors
Pressing the button unlocks the
driver’s door. Pressing the button
again within 5 seconds unlocks the
other doors.
Press and hold to open the side
windows.
*
*
: This setting must be customized
at your Toyota dealer.
■ Switching the door unlock func-
tion
It is possible to set which doors the
entry function unlocks using the
wireless remote control. Perform the
switching operation in the vehicle or
within approximately 3.2 ft. (1 m) of
the vehicle.
1
Turn the power switch to OFF.
2
When the indicator light on the
key surface is not on, press and
hold
, or for
Side doors
The vehicle can be locked
and unlocked using the
entry function, wireless
remote control, door lock
switches or inside lock but-
tons.
Unlocking and locking the
doors from the outside