Toyota Venza 2021, Manual, Page: 115 / 548

114
2-1. Instrument cluster
Select to reset the scheduled main-
tenance information (message indi-
cating maintenance is required and
distance until the next mainte-
nance) after all maintenance is per-
formed.
 Oil Maintenance
Select to reset the Oil maintenance.
(

P.390)
■
Settings
 “Language”
Select to change the language on
the multi-information display.
 “Units”
Select to change the units of mea-
sure displayed.
 (EV indicator) (

P.69)
Select to enable/disable the EV
indicator.
 Digital Speed (

P.109)
Select to enable/disable the Digital
Speed.
 Gadget Content
Select to change the Gadget set-
ting.
 Fuel Economy Type
(

P.106)
Select to change the drive informa-
tion type display between trip, total
and tank.
 “Pop-Up Display”
Select to enable/disable the follow-
ing pop-up displays, which may
appear in some situations.
• Intersection guidance display of
the navigation system-linked sys-
tem (if equipped)
• Incoming call display of the
hands-free phone system
• Audio operation
• Volume operation
• Voice control (if equipped)
• Brightness
 “MID OFF”
A blank screen is displayed.
 “Default Settings”
Select to reset the meter display
settings.
■ Tire pressure
• It may take a few minutes to dis-
play the tire inflation pressure
after the power switch is turned to
ON. It may also take a few min-
utes to display the tire inflation
pressure after inflation pressure
has been adjusted.
• “---” may be displayed if the tire
position information cannot be
determined due to unfavorable
radio wave conditions.
• Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
■ Suspension of the settings dis-
play
● In the following situations, opera-
tion of the settings display will be
temporarily suspended.
• When a warning message
appears on the multi-information
display
• When the vehicle begins to move
● Settings for functions not
equipped to the vehicle are not
displayed.
● When a function is turned off, the
related settings for that function
are not selectable.