Toyota Venza 2021, Manual

Page: 113 / 548

112
2-1. Instrument cluster
• For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding
. When the setting
screen is displayed, select the
setting or desired value (time,
etc.) with
.
3
After changing the settings,
press
of the meter control
switches.
■
LTA (Lane Tracing
Assist) (

P.243)
Select to set up the following
items.
 “Lane Center”
Select to enable/disable the lane
centering function.
 “Steering Assist”
Select to enable/disable steering
wheel assistance.
 “Alert”
Select to set the alert type.
 “Sensitivity”
Select to set the warning sensitivity.
 “Sway Warning”
Select to enable/disable the vehicle
sway warning.
 “Sway Sensitivity”
Select to set the vehicle sway warn-
ing sensitivity.
■
PCS (Pre-Collision Sys-
tem) (

P.235)
Select to set up the following
items.
 PCS on/off
Select to enable/disable the pre-
collision system.
 “Sensitivity”
Select to change the pre-collision
warning timing.
■
BSM (Blind Spot Moni-
tor) (

P.267)
Select to set up the following
items.

BSM (Blind Spot Monitor)
on/off
Select to enable/disable the BSM
system.
 “Brightness”
Select to switch the brightness of
the outside rear view mirror indica-
tors. (

P.267)
 “Sensitivity”
Select to change the alert timing for
an approaching vehicle.
■
(Intuitive parking
assist) (if equipped)
(

P.276)
Select to set up the following
items.
 Intuitive parking assist on/off
Select to enable/disable the Intui-
tive parking assist.
 “Volume”
Select to set the volume of the
buzzer which sounds when the
Intuitive parking assist is operated.