Toyota Venza 2021, Manual

Page: 104 / 548

103
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
the multi-information display.
 “Units”
Select to change the units of mea-
sure displayed.
 (EV indicator) (

P.69)
Select to enable/disable the EV
indicator.
 (Driving information dis-
play settings)
Select to set up the following items.
• “Hybrid System”
Select to enable/disable the ECO
Accelerator Guidance (

P.96).
• “Fuel Economy”
Select to change the display on
Fuel Economy (

P.96).
 (Audio settings)
Select to enable/disable
screen.
 (Vehicle information dis-
play settings)
• “Display Contents”
Select to set up the following items.
“Energy monitor”:
Select to enable/disable the Energy
monitor (

P.120)
“AWD”:
Select to enable/disable the AWD
system display (

P.99).
• “Drive Info Type”
Select to change the drive informa-
tion type display between trip and
total. (

P.99).
• “Drive Info Items”
Select to set the items on the upper
and lower side of the drive informa-
tion screen. from three items, aver-
age speed, distance and total time.
 “Trip Summary”
Select to set the items displayed
when the power switch is turned off.
 “Pop-Up Display”
Select to enable/disable the follow-
ing pop-up displays, which may
appear in some situations.
• Incoming call display of the
hands-free phone system
• Audio operation
• Volume operation
• Brightness
 “MID OFF”
A blank screen is displayed.

“Default Settings”
Select to reset the meter display
settings.
■ Tire pressure
• It may take a few minutes to dis-
play the tire inflation pressure
after the power switch is turned to
ON. It may also take a few min-
utes to display the tire inflation
pressure after inflation pressure
has been adjusted.
• “---” may be displayed if the tire
position information cannot be
determined due to unfavorable
radio wave conditions.
• Tire inflation pressure changes
with temperature. The displayed
values may also be different from
the values measured using a tire
pressure gauge.
■ Suspension of the settings dis-
play
● In the following situations, opera-
tion of the settings display will be