Toyota PT546-1C182 Owner'S Manual Download Page 129

Page: 129 / 144

129

5. SETUP

Highlander_Navi_MXS

SE
TUP

Display the “Phone/Message Settings”
screen. (



P.120)

Touch

“Messaging Settings”

Touch the desired item to be set.

“Messaging Settings”
SCREEN

No.

Function

Touch to set automatic message
transfer on/off.

Touch to set automatic message
readout on/off.

Touch to set the SMS/MMS notifica-
tion popup on/off.

Touch to set the e-mail notification
popup on/off.

Touch to set adding the vehicle signa-
ture to outgoing messages on/off.

Touch to set updating message read
status on phone on/off.

Touch to change the incoming SMS/
MMS display.

“Full Screen”

: When an SMS/MMS

message is received, the incoming
SMS/MMS display screen is dis-
played and can be operated on the
screen.

“Drop-down”

: When an SMS/MMS

message is received, a message is
displayed on the upper side of the
screen.

Touch to change the incoming e-mail
display.

“Full Screen”

: When an e-mail is re-

ceived, the incoming e-mail display
screen is the displayed and can be
operated on the screen.

“Drop-down”

: When an e-mail is re-

ceived, a message is displayed on the
upper side of the screen.

Touch to set display of messaging ac-
count names on the inbox tab on/off.
When set to on, messaging account
names used on the cellular phone will
be displayed.

Touch to reset all setup items.

INFORMATION



Depending on the phone, these func-
tions may not be available.

Summary of Contents for PT546-1C182

















































































































































Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands

Toyota PT546-1C182, Owner'S Manual

Search results

Summary of Contents for PT546-1C182

Reviews:

Related manuals for PT546-1C182

Brands by name

Popular brands