Toyota Land Cruiser Station Wagon 2020 Owner'S Manual Download

Page: 65 / 690

LC2MM_OM60T13E_(GE)

20.04.16 09:32

2. Bluetooth

settings (Type 2)

Basic

fun

tio
n

Display the “Bluetooth* Setup” screen.
(

→

P.60)

Select

“Add”

When another Bluetooth

device is con-

nected

To disconnect the Bluetooth

device,

select

“Yes”

When 5 Bluetooth

devices have al-

ready been registered

A registered device needs to be replaced.
Select

“Yes”

, and select the device to be

replaced.

When this screen is displayed, search
for the device name displayed on this
screen on the screen of your

Bluetooth

device.

For details about operating the Bluetooth

device, see the manual that comes with it.

To cancel the registration, select

“Can-

cel”

*: The Bluetooth

word mark and logos

are registered trademarks owned by the
Bluetooth SIG, Inc.

device using

your Bluetooth

device.

A PIN-code is not required for SSP
(Secure Simple Pairing) compatible

Bluetooth

devices. Depending on the

type of Bluetooth

device being con-

nected, a message confirming registra-

tion may be displayed on the Bluetooth

device’s screen. Respond and operate the

Bluetooth

device according to the confir-

mation message.

Check that the following screen is dis-
played when registration is complete.

The system waits for connection requests
coming from the registered device.

At this stage, the Bluetooth

functions are

not yet available.

Select

“OK”

when the connection sta-

tus changes from “Connecting...” to
“Connected”.

If an error message is displayed, follow
the guidance on the screen to try again.

Registering a Bluetooth

device

Up to 5 Bluetooth

devices can be reg-

istered.

Bluetooth

compatible phones (HFP)

and audio players (AVP) can be regis-
tered simultaneously.

This operation cannot be performed
while driving.

Summary of Contents for Land Cruiser Station Wagon 2020



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Related manuals for Land Cruiser Station Wagon 2020

Brands by name

Popular brands

Toyota Land Cruiser Station Wagon 2020, Owner'S Manual

Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Related manuals for Land Cruiser Station Wagon 2020

Brands by name

Popular brands