manualshive.com logo in svg

Toyota Land Cruiser Station Wagon 2020, Owner'S Manual

Share
Download
Toyota Land Cruiser Station Wagon 2020 Owner'S Manual Download Page 450

LC2MM_OM60T13E_(GE-EE)

20.03.24     14:47

44

2. Network settings

1

Display the “Bluetooth*” screen.
(

→

P.39)

2

Select 

“Detailed Bluetooth* set-

tings”

.

3

Select the desired item to be set.

*: The Bluetooth

®

 word mark and logos

are registered trademarks owned by the
Bluetooth SIG, Inc.

1

Select 

“Bluetooth* power”

.

When “Bluetooth* power” is on

: 

The Bluetooth

®

 device is automatically

connected when the engine switch is in
ACCESSORY or IGNITION ON mode.

When “Bluetooth* power” is off

: 

The Bluetooth

®

 device is disconnected,

and the system will not connect to it next
time.

*: The Bluetooth

®

 word mark and logos

are registered trademarks owned by the
Bluetooth SIG, Inc.

“Detailed Bluetooth* settings” 
screen 

The Bluetooth

®

 settings can be con-

firmed and changed.

No.

Information

Page

Select to set Bluetooth

®

connection on/off. 

44

Displayed system name can
be changed to a desired
name.

45

PIN code used when the
Bluetooth

®

 device was reg-

istered. It can be changed to
a desired code.

45

Device address is unique to
the device and cannot be
changed.

Select to set the telephone
connection status display
on/off.

Select to set the connection
status display of the audio
player on/off.

Compatibility profile of the
system. 

Select to reset all setup
items.

Changing “Bluetooth* power”

INFORMATION

●

While driving, the auto connection state
can be changed from off to on, but can-
not be changed from on to off.

Summary of Contents for Land Cruiser Station Wagon 2020



















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands