Toyota Land Cruiser Station Wagon 2020 Owner'S Manual Download Page 523

Page: 523 / 690

LC2MM_OM60T13E_(GE-EE)

20.03.24 14:47

117

5. Setup

Navig

atio

sys

tem

Display the “Traffic info settings”
screen. (

→

P.114)

Select

“RDS-TMC station”

Select

“Manual”

A list of traffic stations and the country in
which it can be received is displayed.

Select the desired traffic station.

“Search”

: Select to search for traffic sta-

tion again.

Display the “Traffic info settings”
screen. (

→

P.114)

Select

“Live update (Internet)

(Wi-Fi*

& Bluetooth*

)”

: Wi-Fi

is a registered trademark of Wi-Fi

Alliance

: The Bluetooth

word mark and logos

are registered trademarks owned by
the Bluetooth SIG, Inc.

Select the desired item.

RDS-TMC station

“Manual”

is selected, traffic stations

must be searched for before being
memorized.

Setting TPEG traffic
information update frequency

TPEG traffic information can be re-
ceived via Wi-Fi

or a Bluetooth

de-

vice. This information can be set to
update automatically or manually.

No.

Function

Select to update automatically more
frequently.

Select to update automatically less
frequently.

Select to update manually.
(

→

P.118)

Select to cancel TPEG traffic infor-
mation reception via Wi-Fi

or a

Bluetooth

device.

Summary of Contents for Land Cruiser Station Wagon 2020



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Brands by name

Popular brands

Toyota Land Cruiser Station Wagon 2020, Owner'S Manual

Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Brands by name

Popular brands