Toyota Hiace Owner'S Manual Download Page 21

Page: 21 / 204

Finish

HIACE_AE (L/O 0308)

OPERATING FROM INSIDE
Move the lock button.

To lock: Push the button downward.

To unlock: Pull the button upward.

To open the back door, turn the inside

lever clockwise and push the back door

outward.

Vehicles with a power door lock sys-

tem—The back door lock will be controlled

with the driver’s door lock knob. (For in-

structions, see “Side doors” in this Sec-

tion.)

LOCKING

AND

UNLOCKING

WITH

POWER BACK DOOR LOCK SWITCH
Push the power back door lock switch.

To lock: Push the switch on the “LOCK”

side.

To unlock: Push the switch on the

“UNLOCK” side.

Strap

Engine access hole cover

Not for Reproduction

Summary of Contents for Hiace













































































































































































































Search results

Summary of Contents for Hiace

Reviews:

Related manuals for Hiace

Brands by name

Popular brands

Toyota Hiace, Owner'S Manual

Search results

Summary of Contents for Hiace

Reviews:

Related manuals for Hiace

Brands by name

Popular brands