Toyota Hiace, Owner'S Manual

Page: 194 / 204

Finish
HIACE_AE (L/O 0308)
187
Coolant type:
“Toyota Super Long Life Coolant” is
used in your Toyota vehicle at factory
fill. In order to avoid technical problems,
only use “Toyota Super Long Life
Coolant” or similar high quality ethylene
glycol based non − silicate, non − amine,
non − nitrite, and non − borate coolant with
long − life hybrid organic acid technology.
(Coolant with long − life hybrid organic
acid technology is a combination of low
phosphates and organic acids.)
Do not use plain water alone.
Please contact your Toyota dealer for
further details.
BATTERY
Specific gravity reading at 20
_
C (68
_
F):
1.250—1.290 Fully charged
1.160—1.200 Half charged
1.060—1.100 Discharged
Charging rates:
Quick charge 15 A max.
Slow charge 5 A max.
CLUTCH
Pedal free play, mm (in.):
5—15 (0.2—0.6)
Fluid type:
SAE J1703 or FMVSS No.116 DOT 3
MANUAL TRANSMISSION
Oil capacity, L (qt., Imp. qt.):
2.2 (2.3, 1.9)
Oil type:
Gear oil API GL − 4 or GL − 5
Recommended oil viscosity:
SAE 75W − 90
AUTOMATIC TRANSMISSION
Fluid capacity (drain and refill), L (qt.,
Imp. qt.):
Up to 2.4 (2.5, 2.1)
Fluid type:
Toyota Genuine ATF D − II or
DEXRON
r
III (DEXRON
r
II)
Please contact your Toyota dealer for fur-
ther details.
DIFFERENTIAL
Oil capacity, L (qt., lmp. qt.):
2.2 (2.3, 1.9)
“Toyota Genuine Differential Gear Oil” is
filled in your Toyota vehicle. Use Toyota
approved “Toyota Genuine Differential
Gear Oil” or equivalent to satisfy the fol-
lowing specification.
Oil type:
Standard differential
Hypoid gear oil API GL − 5
Limited − slip differential
Hypoid gear oil for limited slip differ-
ential API GL − 5
Recommended oil viscosity:
Above –18
_
C (0
_
)
SAE 90
Below –18
_
C (0
_
F)
SAE 80W or 80W − 90
Please contact your Toyota dealer for fur-
ther details.
CHASSIS LUBRICATION
Wheel bearings:
Lithium complex base wheel bearing
grease, NLGI No.2
BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
58 (2.3)
Pedal free play, mm (in.):
1—6 (0.04—0.24)
Not for Reproduction