Toyota Hiace Owner'S Manual Download Page 130

Page: 130 / 204

Finish

HIACE_AE (L/O 0308)

123

Discharged battery

Booster

battery

Positive

terminal

(“+” mark)

Jumper cable Positive terminal

(“+” mark)

4. Make the cable connections in the or-

der a, b, c, d.
a. Connect the clamp of the positive

(red) jumper cable to the positive (+)

terminal on the discharged battery.
b. Connect the clamp at the other end

of the positive (red) jumper cable to

the positive (+) terminal on the booster

battery.

Booster battery

Jumper cable

Negative

terminal

(“

−

” mark)

Discharged

battery

c. Connect the clamp of the negative

(black) jumper cable to the negative (

−

)

terminal on the booster battery.
d. Connect the clamp at the other end

of the negative (black) jumper cable to

a solid, stationary, unpainted, metallic

point of the vehicle with the discharged

battery.
The recommended connecting point is

shown in the following illustration:

Connecting point

Do not connect the cable to or near

any part that moves when the engine

is cranked.

CAUTION

When making the connections, to

avoid serious injury, do not lean over

the battery or accidentally let the

jumper cables or clamps touch any-

thing except the correct battery termi-

nals or the ground.

Not for Reproduction

Summary of Contents for Hiace













































































































































































































Search results

Summary of Contents for Hiace

Reviews:

Toyota Hiace, Owner'S Manual, Page: 130 / 204

Search results

Summary of Contents for Hiace

Reviews: