manualshive.com logo in svg

Toyota Corolla guide, Instruction Manual

Share
Download
Toyota Corolla guide Instruction Manual Download Page 563

563

7-2. Steps to take in an emergency

Corolla_TMMT_EE (OM12F04E)

7

W

hen
 troub

le 

arise

s

CAUTION

Do not drive the vehicle with a flat tire

Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and the
wheel beyond repair.

Driving with a flat tire may cause a circumferential groove on the side wall.
In such a case, the tire may explode when using a repair kit.

Caution while driving

The repair kit is exclusively only for your vehicle.
Do not use repair kit on other vehicles, which could lead to an accident
causing death or serious injury.

Do not use repair kit for tires that are different size than the original ones,
or for any other purpose. If the tires have not been completely repaired, it
could lead to an accident causing death or serious injury.

Precautions for use of the sealant

Ingesting the sealant is hazardous to your health. If you ingest sealant,
consume as much water as possible, and then immediately consult a doc-
tor.

If sealant gets in eyes or adheres to skin, immediately wash it off with
water. If discomfort persists, consult a doctor.

When fixing the flat tire

Stop your vehicle in a safe and flat area.

Do not touch the wheels or the area around the brakes immediately after
the vehicle has been driven. 
After the vehicle has been driven, the wheels and the area around the
brakes may be extremely hot. Touching these areas with hands, feet or
other body parts may result in burns.

To avoid risk of burst or severe leakage, do not drop or damage the bottle.
Visually inspect the bottle before use. Do not use a bottle with shock,
crack, scratch, leakage or any other damage. In such case, immediately
replace.

Connect the valve and hose securely with the tire installed on the vehicle.
If the hose is not properly connected to the valve, air leakage may occur
as sealant may be sprayed out.

If the hose comes off the valve while inflating the tire, there is a risk that
the hose will move abruptly due to air pressure.

Summary of Contents for Corolla guide

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands