manualshive.com logo in svg

Toyota Corolla guide, Instruction Manual

Share
Download
Toyota Corolla guide Instruction Manual Download Page 189

189

4-1. Before driving

Corolla_TMMT_EE (OM12F04E)

4

D

riving

Tire information

Increase the tire inflation pressure to 20.0 kPa (0.2 kgf/cm

2

 or bar, 3 psi)

greater than the recommended value when towing. (

P. 599)

Increase the air pressure of the trailer tires in accordance with the total
trailer weight and according to the values recommended by the manufac-
turer of your trailer.

Trailer lights

Check that the turn signal lights and stoplights are operating correctly every
time you hitch up the trailer. Directly wiring up to your vehicle may damage
the electrical system and stop the lights from functioning correctly.

Break-in schedule

Toyota recommends that vehicles fitted with new power train components
should not be used for towing trailers for the first 800 km (500 miles).

Safety checks before towing

Check that the maximum load limit for the towing hitch/bracket and hitch ball
is not exceeded. Bear in mind that the coupling weight of the trailer will add
to the load exerted on the vehicle. Also make sure that the total load exerted
on the vehicle is within the range of the weight limits. (

P. 186)

Ensure that the trailer load is secure.

Supplementary outside rear view mirrors should be added to the vehicle if
the traffic behind cannot be clearly seen with standard mirrors. Adjust the
extending arms of these mirrors on both sides of the vehicle so that they
always provide maximum visibility of the road behind.

Maintenance

Maintenance must be performed more frequently when using the vehicle for
towing due to the greater weight burden placed on the vehicle compared to
normal driving.

Retighten all bolts securing the hitching ball and bracket after towing for
approximately 1000 km (600 miles).

Summary of Contents for Corolla guide

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands