Toyota Corolla guide Instruction Manual Download Page 243

Page: 243 / 632

243

4-5. Using the driving support systems

Corolla_TMMT_EE (OM12F04E)

riving

To change the set speed, operate the lever until the desired set speed
is obtained.

Increases the speed
Decreases the speed

Fine adjustment: Momentarily
move the lever in the desired direc-
tion.

Large adjustment: Hold the lever in
the desired direction.

The set speed will be increased or decreased as follows:

Fine adjustment: By approximately 1.6 km/h (1 mph) each time the lever is
operated.

Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.

Pulling the lever toward you
cancels the constant speed
control.

The speed setting is also canceled
when the brakes are applied or the
clutch pedal (manual transmission)
is depressed.

Pushing the lever up resumes
the constant speed control.

Resuming is available when the
vehicle speed is more than approx-
imately 40 km/h (25 mph).

Adjusting the set speed

1
2

Canceling and resuming the constant speed control

Summary of Contents for Corolla guide

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla guide

Reviews:

Brands by name

Popular brands

Toyota Corolla guide, Instruction Manual

Search results

Summary of Contents for Corolla guide

Reviews:

Brands by name

Popular brands