manualshive.com logo in svg

Toyota Corolla guide, Instruction Manual

Share
Download
Toyota Corolla guide Instruction Manual Download Page 182

182

4-1. Before driving

Corolla_TMMT_EE (OM12F04E)

NOTICE

If you get a flat tire while driving 

A flat or damaged tire may cause the following situations. Hold the steering
wheel firmly and gradually depress the brake pedal to slow down the vehi-
cle.

It may be difficult to control your vehicle.

The vehicle will make abnormal sounds or vibrations.

The vehicle will lean abnormally.

Information on what to do in case of a flat tire (

P. 526, 542)

When encountering flooded roads

Do not drive on a road that has flooded after heavy rain etc. Doing so may
cause the following serious damage to the vehicle:

Engine stalling

Short in electrical components

Engine damage caused by water immersion

In the event that you drive on a flooded road and the vehicle is flooded, be
sure to have any authorized Toyota dealer or repairer, or another duly quali-
fied and equipped professional check the following:

Brake function

Changes in quantity and quality of engine oil, transaxle fluid, etc.

Lubricant condition for the bearings and suspension joints (where possi-
ble), and the function of all joints, bearings, etc.

Summary of Contents for Corolla guide

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands