manualshive.com logo in svg

Toyota Corolla guide, Instruction Manual

Share
Download
Toyota Corolla guide Instruction Manual Download Page 245

245

4-5. Using the driving support systems

Corolla_TMMT_EE (OM12F04E)

4

D

riving

CAUTION

To avoid operating the cruise control by mistake

Switch the cruise control off using the “ON-OFF” button when not in use.

Situations unsuitable for cruise control

Do not use cruise control in any of the following situations.
Doing so may result in loss of control and could cause an accident resulting
in death or serious injury.

In heavy traffic

On roads with sharp bends

On winding roads

On slippery roads, such as those covered with rain, ice or snow

On steep hills
Vehicle speed may exceed the set speed when driving down a steep hill.

When your vehicle is towing a trailer or during emergency towing

Summary of Contents for Corolla guide

























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands