Toyota Corolla 2002 Operating Manual Download Page 80

Page: 80 / 253

’02 Corolla U (L/O 0105)

2002 Corolla_U (OM12743U)

To turn on the personal light, push the
switch. To turn it off, push the switch
once again.

Type A

Type B

To turn on the windshield wipers, move
the lever to the desired setting.

The key must be in the “ON” position.

Type A—

Lever position

Speed setting

Position 1

Slow

Position 2

Fast

For a single sweep of the windshield,
push the lever up and release it.

Type B—

Lever position

Speed setting

Position 1

Intermittent

Position 2

Slow

Position 3

Fast

With interval adjuster: The “INT TIME”
band lets you adjust the wiping time inter-
val when the wiper lever is in the intermit-
tent position (position 1). Twist the band
upward to increase the time between
sweeps, and downward to decrease it.

Windshield wipers and washer

Summary of Contents for Corolla 2002






























































































































































































































































Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands

Toyota Corolla 2002, Operating Manual

Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands