Toyota Corolla 2002 Operating Manual Download Page 193 | Manualshive

Page: 193 / 253

background image

’02 Corolla U (L/O 0105)

193

2002 Corolla_U (OM12743U)

Check the interior of your vehicle. Wa-
ter and dirt can accumulate under the
floor mats and could cause corrosion. Oc-
casionally check under the mats to make
sure the area is dry. Be particularly care-
ful when transporting chemicals, cleans-
ers, fertilizers, salt, etc.; these should be
transported in proper containers. If a spill
or leak should occur, immediately clean
and dry the area.

Use mud shields on your wheels. If you
drive on salted or gravel roads, mud
shields help protect your vehicle. Full–size
shields, which come as near to the ground
as possible, are the best. We recommend
that the fittings and the area where the
shields are installed be treated to resist
corrosion. Your Toyota dealer will be
happy to assist in supplying and installing
the shields if they are recommended for
your area.

Keep your vehicle in a well ventilated
garage or a roofed place. Do not park
your vehicle in a damp, poorly venti-
lated garage. If you wash your vehicle in
the garage, or if you drive it in covered
with water or snow, your garage may be
so damp it will cause corrosion. Even if
your garage is heated, a wet vehicle can
corrode if the ventilation is poor.

Washing your Toyota

Keep your vehicle clean by regular
washing.

The following cases may cause weakness
to the paint or corrosion to the body and
parts. Wash your vehicle as soon as pos-
sible.

When driving in a coastal area

When driving on a road sprinkled with
antifreeze

When having stuck of coal tar, tree
sap, bird droppings and carcass of an
insect

When driving in the areas where there
is a lot of smoke, soot, dust, iron dust
and chemical substance

When the vehicle becomes remarkably
dirty with dust and mud

Hand–washing your Toyota

Work in the shade and wait until the
vehicle body is not hot to the touch.

CAUTION

When cleaning under floor or chassis,
be careful not to injure your hands.

1. Rinse off loose dirt with a hose. Re-

move any mud or road salt from the
underside of the vehicle or in the
wheel wells.

2. Wash with a mild car–wash soap,

mixed according to the manufacturer’s
instructions. Use a soft cotton mitt and
keep it wet by dipping it frequently into
the wash water. Do not rub hard—let
the soap and water remove the dirt.

Plastic wheel ornaments: The plastic
wheel ornaments are damaged easily by
organic substances. If any organic sub-
stances splashes an ornament, be sure to
wash it off with water and check if the
ornament is damaged.

CAUTION

Do not attach the heavily damaged
plastic wheel ornament. It may fly off
the wheel and cause accidents while
the vehicle is moving.

Washing and waxing your
Toyota

«
...
191
192
193
194
195
...
»

Summary of Contents for Corolla 2002






























































































































































































































































Reviews:

No comments

Related manuals for Corolla 2002

Brand: Camcar Pages: 6

2011 grand cherokee

Brand: Jeep Pages: 22

2013 Grand Cherokee

Brand: Jeep Pages: 704

Brand: Jeep Pages: 558

CK 3000 Evolution

Brand: Parrot Pages: 2

Brand: Saab Pages: 10

Brand: Calix Pages: 5

Brand: Xhorse Pages: 48

Brand: JSPORT Pages: 2

Brand: Subaru Pages: 16

Brand: Acura Pages: 4

EPS-LD SafePark

Brand: Tobe Pages: 2

Brand: Kargo Master Pages: 18

BLADE-AL-HK4-EN

Brand: iDataLink Pages: 35

ASENTO EV-EXP18R

Brand: ADAPT SOLUTIONS Pages: 25

Brand: Boyo Pages: 2

Chevrolet CAMARO 1969

Brand: GMC Pages: 92

Brand: Saab Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands