Toyota Corolla 2002 Operating Manual Download Page 72

Page: 72 / 253

’02 Corolla U (L/O 0105)

2002 Corolla_U (OM12743U)

To adjust the rear view mirror, simply
operate the control lever.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de–icer to free
the mirror.

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted
Place the switch at “L” (left) or “R”
(right).

2. Control switch—To move the mir-

ror Push the switch in the desired
direction.

Mirror can be adjusted when key is in the
“ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de–icer to free
the mirror.

—Rear view mirror remote
control

—Power rear view mirror
control

Summary of Contents for Corolla 2002






























































































































































































































































Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands

Toyota Corolla 2002, Operating Manual

Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands