Toyota Corolla 2002 Operating Manual Download Page 223

Page: 223 / 253

’02 Corolla U (L/O 0105)

223

2002 Corolla_U (OM12743U)

When installing aluminum wheels,
check that the wheel nuts are tight
after driving your vehicle the first 1600
km (1000 miles).

If you have rotated, repaired, or
changed your tires, check that the
wheel nuts are still tight after driving
1600 km (1000 miles).

When using tire chains, be careful not
to damage the aluminum wheels.

Use only the Toyota wheel nuts and
wrench designed for your aluminum
wheels.

When balancing your wheels, use only
Toyota balance weights or equivalent
and a plastic or rubber hammer.

As with any wheel, periodically check
your aluminum wheels for damage. If
damaged, replace immediately.

Aluminum wheel precautions

Summary of Contents for Corolla 2002






























































































































































































































































Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands

Toyota Corolla 2002, Operating Manual

Search results

Summary of Contents for Corolla 2002

Reviews:

Related manuals for Corolla 2002

Brands by name

Popular brands