Toyota Corolla 2001 Owner'S Manual Download Page 41

Page: 41 / 249

’01 Corolla U (L/O 0005)

180

2001MY_COROLLA_U (OM12720U)

—Blocking the wheel

2. Block the wheel diagonally opposite

the flat tire to keep the vehicle from
rolling when it is jacked up.

When blocking the wheel, place a wheel
block from the front for the front wheels
or from the rear for the rear wheels.

—Removing wheel ornament

Type A

Type B

3. Remove the wheel ornament.

Pry off the wheel ornament, using the
beveled end of the wheel nut wrench as
shown.

CAUTION

Do not try to pull off the ornament by
hand. Take due care in handling the
ornament to avoid unexpected person-
al injury.

Summary of Contents for Corolla 2001


























































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Owner'S Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands