Toyota Corolla 2001 Owner'S Manual Download Page 145

Page: 145 / 249

’01 Corolla U (L/O 0005)

2001MY_COROLLA_U (OM12720U)

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted
Place the switch at “L” (left) or “R”
(right).

2. Control switch—To move the mir-

ror Push the switch in the desired
direction.

Mirror can be adjusted when key is in the
“ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de–icer to free
the mirror.

Adjust the mirror so that you can just
see the rear of your vehicle in the mir-
ror.

To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.

Daylight driving—Lever at position 1

The reflection in the mirror has greater
clarity at this position.

Night driving—Lever at position 2

Remember that by reducing glare you also
lose some rear view clarity.

—Power rear view mirror
control

Anti–glare inside rear view
mirror

Summary of Contents for Corolla 2001


























































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Owner'S Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands