Toyota Corolla 2001 Owner'S Manual Download Page 88

Page: 88 / 249

’01 Corolla U (L/O 0005)

2001MY_COROLLA_U (OM12720U)

—Lock release lever

To open the trunk lid from the driver’s
seat, pull up on the lock release lever.

After closing the trunk lid, insert the
master key and turn it counterclockwise
to deactivate the lock release lever.

After closing the trunk lid, try pulling it up
to make sure it is securely locked.

If a person is locked in the trunk, pull
down the phosphorescent handle lever
on the inside of trunk lid in case of
emergency to open the trunk lid.

—Lock release lever
cancelling system

—Internal trunk release
handle

Summary of Contents for Corolla 2001


























































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Owner'S Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands