Toyota Corolla 2001 Operating Manual Download Page 68

Page: 68 / 245

’01 Corolla U (L/O 0005)

2001MY_COROLLA_U (OM12720U)

TO USE THE ANCHOR BRACKET:

1. Outside anchor brackets only—

Remove the head restraint.

2. Fix the child restraint system with

the seat belt.

Latch the hook onto the anchor
bracket and tighten the top strap.

For instructions to install the child re-
straint system, see ”Child restraint” in this
section.

CAUTION

Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.

3. Outside anchor brackets only—

Replace the head restraint.

Summary of Contents for Corolla 2001






















































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Operating Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands