Toyota Corolla 2001 Operating Manual Download Page 141

Page: 141 / 245

’01 Corolla U (L/O 0005)

141

2001MY_COROLLA_U (OM12720U)

Type C

To use the box, do the following.

Type A and type B: Pull on the handle.
Type C: Open the center console box.

CAUTION

To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the auxiliary box closed
while driving.

Cup holders

Type A (front)

Type B (rear)

Type C (rear)

The cup holder is designed for holding
cups or drink–cans securely.

Type A: To use the holder, push in and
pull it out completely.

Type B: To use the holder, pull it out.

Type C: To use the holder, pull it out and
widen the arm to fit to the size of a cup
or drink–can.

Summary of Contents for Corolla 2001






















































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Operating Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands