Toyota Corolla 2001 Operating Manual Download Page 18

Page: 18 / 245

’01 Corolla U (L/O 0005)

2001MY_COROLLA_U (OM12720U)

The indicator lamp goes off after driving
several times. If the indicator lamp does
not go off, contact your Toyota dealer as
soon as possible.

CAUTION

Make sure the cap is tightened se-
curely to prevent fuel spillage in
case of an accident.

Use only a genuine Toyota fuel tank
cap for replacement. It is designed
to regulate fuel tank pressure.

Electric moon roof

Sliding operation

Tilting operation

To operate the moon roof, use the
switches beside the personal light.

The moon roof works when the ignition
switch is in the “ON” position.

Sun shade operation—

The sun shade can be opened or closed
by hand.

Sliding operation—

To open: Push the switch on the rear
side.

The sun shade will be opened together
with the roof.

To close: Push the switch on the front
side.

As a precaution when closing, the roof
stops at the half closed position before
fully closing. Therefore, release the switch
and then push it again to close it com-
pletely.

Summary of Contents for Corolla 2001






















































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Operating Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands