Toyota Corolla 2001 Operating Manual Download Page 138

Page: 138 / 245

’01 Corolla U (L/O 0005)

138

2001MY_COROLLA_U (OM12720U)

Clock

The digital clock indicates the time.

The key must be in the “ACC” or “ON”
position.

To reset the hour: Push the “H” button.
To reset the minutes: Push the “M” button.

If the electrical power source has been
disconnected from the clock, the time dis-
play will automatically be set to 1:00 (one
o’clock).

When the instrument panel lights are
turned on, the brightness of the time in-
dication will be reduced.

Outside temperature display

Centigrade display

Fahrenheit display

The outside temperature display indi-
cates the outside air temperature.

The key must be in the “ON” position.

If there is some abnormality in the con-
nection of the outside air temperature sen-
sor, “–E” or “E” will appear on the display.
If “–E” or “E” appears on the display,
contact your Toyota dealer.

Summary of Contents for Corolla 2001






















































































































































































































































Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands

Toyota Corolla 2001, Operating Manual

Search results

Summary of Contents for Corolla 2001

Reviews:

Related manuals for Corolla 2001

Brands by name

Popular brands