Toyota Camry Hybrid 2018 Owner'S Manual Download Page 61

Page: 61 / 596

1-2. Child safety

For safet

y and s

curity

A child restraint system for a small child or baby must itself be prop-
erly restrained on the seat with the lap portion of the lap/shoulder belt.

◆

Installing child restraint system using a seat belt (child
restraint lock function belt)

Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.

■

Rear-facing — Infant seat/convertible seat

Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.

Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.

Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.

Child restraint system fixed with a seat belt

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands

Toyota Camry Hybrid 2018, Owner'S Manual

Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands