Toyota Camry Hybrid 2018 Owner'S Manual Download Page 70

Page: 70 / 596

1-2. Child safety

■

Anchor brackets (for top tether strap)

Anchor brackets are provided for each rear seat.
Use anchor brackets when fixing the top tether strap.

■

Fixing the top tether strap to the anchor bracket

Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.

Adjust the head restraint to
the upmost position.

If the head restraint interferes
with the child restraint system
installation and the head
restraint can be removed,
remove the head restraint.
(

→

P. 173)

Using an anchor bracket (for top tether strap)



Seats with an adjustable type
head restraint



Seats with an integrated type
head restraint

Anchor brackets

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands

Toyota Camry Hybrid 2018, Owner'S Manual

Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands