Toyota Camry Hybrid 2018 Owner'S Manual Download Page 409

Page: 409 / 596

409

6-2. Maintenance

Mai

tenan

ce and care

Seat belts

• Do the seat belts operate

smoothly?

• The seat belts should not be dam-

aged.

Seats

• Do the seat controls operate prop-

erly?

Steering wheel

• Does the steering wheel rotate

smoothly?

• Does the steering wheel have the

correct amount of free play?

• There should not be any strange

sounds coming from the steering
wheel.

Vehicle exterior

Items

Check points

Items

Check points

Doors/trunk

• Do the doors/trunk operate

smoothly?

Engine hood

• Does the engine hood lock system

work properly?

Fluid leaks

• There should not be any signs of

fluid leakage after the vehicle has
been parked.

Tires

• Is the tire inflation pressure cor-

rect?

• The tires should not be dam-

aged or excessively worn.

• Have the tires been rotated

according to the maintenance
schedule?

• The wheel nuts should not be

loose.

Windshield wipers

• The wiper blades should not show

any signs of cracking, splitting,
wear, contamination or deforma-
tion.

• The wiper blades should clear the

windshield without streaking or
skipping.

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands

Toyota Camry Hybrid 2018, Owner'S Manual

Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Related manuals for Camry Hybrid 2018

Brands by name

Popular brands