Toyota 62-8FDU15, Repair Manual

Page: 62 / 222

7-60 7 DISPLAY
7.1.4.4 Meter
Every pressing switch (4) on the status screen, change the screen to Odometer/Trip, maintenance hour
meter screen.
1. Odometer
The Odometer displays the total travel distance.
In factory setting, default models are preset in "mile".
And export SPEC.[OPT], E.E.C. SPEC.[OPT], mm-kg indicator SPEC [OPT] are preset in "km/h".
2. Trip meter
The trip meter displays the travel distance after reset.
The trip meter can be reset by pressing switch (1) for 2 seconds or more.
In factory setting, default models are preset in "mile".
And export SPEC.[OPT], E.E.C. SPEC. [OPT], mm-kg indicator SPEC [OPT] are preset in "km/h".
3. Planned maintenance hour meter
The planned maintenance hour meter displays preset service interval time and the current elapsed time.
The maintenance hour meter integrates the elapsed time while the key switch is turned on.
It also continues to integrate the elapsed time even if it exceeds the preset service interval time.
NOTICE
The odometer, trip meter, and planned maintenance hour meter are not started in the factory setting.
When the truck is delivered, please start the meter according to the repair manual.
(The indicator below appears when the meter doesn’t start.)