manualshive.com logo in svg

Toyota 62-8FDU15, Repair Manual

Share
Download
Toyota 62-8FDU15 Repair Manual Download Page 105

7-103

7 DISPLAY

▪

"I/O M.HANDLING 3/7"

POTL: 

Lift lever angle sensor (1) voltage (V)/lift lever angle

sensor (2) voltage (V)
Displays input voltage from the lift lever angle sensor (1)/lift
lever angle sensor (2) to the controller.

STD lever vehicle:
POTL: - = Always

Mini lever/Joystick vehicle:

Standard:
Lift lever: Rasing
Lift lever angle sensor (1) voltage: 1.8 to 4.1 V
Lift lever angle sensor (2) voltage: 0.3 to 2.9 V
Lift lever: Lowering
Lift lever angle sensor (1) voltage: 0.4 to 2.8 V
Lift lever angle sensor (2) voltage: 1.6 to 4.3 V

LPSOL: 

Lift proportional valve solenoid current (A)

Displays output current from the controller to the lift propor-
tional valve solenoid.

STD lever vehicle:
LPSOL: - = Always

Mini lever/Joystick vehicle:

Standard when lever is operated: 0.3 to 0.85 A

LSOL: 

Lift lowering lock solenoid

Refer to "I/O M.HANDLING 1/7"

Switch (4): To "I/O M.HANDLING 4/7" screen

▪

"I/O M.HANDLING 4/7"

POTT: 

Tilt lever angle sensor (1) voltage (V)/tilt lever angle

sensor (2) voltage (V)
Displays input voltage from the tilt lever angle sensor (1)/tilt
lever angle sensor (2) to the controller.

STD lever vehicle:
POTT: - = Always

Mini lever/Joystick vehicle:

Standard:
Tilt lever: Forward tilt
Tilt lever angle sensor (1) voltage: 1.8 to 4.1 V
Tilt lever angle sensor (2) voltage: 0.3 to 2.9 V
Tilt lever: Backward tilt
Tilt lever angle sensor (1) voltage: 0.4 to 2.8 V
Tilt lever angle sensor (2) voltage: 1.6 to 4.3 V

TPSOL: 

Tilt proportional valve solenoid current (A)

Displays output current from the controller to the tilt propor-
tional valve solenoid.

STD lever vehicle:
TPSOL: - = Always

Mini lever/Joystick vehicle:

Standard when lever is operated: 0.3 to 0.85 A

TSOL: 

Tilt solenoid

Refer to "I/O M.HANDLING 1/7"

Switch (4): To "I/O M.HANDLING 5/7" screen

7

Summary of Contents for 62-8FDU15































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands