Toyota 62-8FDU15, Repair Manual

Page: 38 / 222

5-36 5 OIL CONTROL VALVE
Inspection:
Check and clean any clogged orifice.
Reassembly:
Carefully reassemble to prevent incorrect installation
of each solenoid spool.
Point 6 Inspection:
Check the backward tilt lock SOL for continuity.
(Reference)
Resistance: 9.4 to 10.4 Ω (at 20 °C)
Inspection:
Check and clean any clogged filter.
Reassembly:
Carefully reassemble to prevent incorrect installation
of each solenoid spool.
1
2
3 4
Point 7 Inspection:
Check the tilt limit switch for continuity.
Forward tilting side
(measurement terminals 1
⇔
2):
No continuity when the switch is pressed.
Backward tilting side
(measurement terminals 3
⇔
4):
No continuity when the switch is pressed.
Be careful not to mistake the forward and backward
tilt limit switches.