Toyota 2002 Land Cruiser Owner'S Manual Download Page 405

Page: 405 / 414

107

(x) Changing the angle

unx619

The angle can be selected from the disc in

which the multi

−

angle is memorized and

changed when the angle mark appears on

the display.
Each time you touch “Angle”, the angle

changes.

Touch “Return”, the previous screen returns.

(xi) Setup menu

unx617

The initial setting can be changed.

Audio language

You can change the audio language.
1. Touch “Audio Lang.”
2. Touch a language you want to hear on

the “Select Audio Lang.” screen and “En-

ter”.

If you cannot find a language you want to

hear on this screen, touch “Others” and enter

a language code. For the entry of language

code, see page 108.

Subtitle language

You can change the subtitle language.
1. Touch “Subtitle Lang.”
2. Touch a language you want to read on

the “Select Subtitle Lang.” screen and

“Enter”.

If you cannot find a language you want to

read on this screen, touch “Others” and enter

a language code. For the entry of language

code, see page 108.

DVD language

You can change the language on the DVD

video menu.
1. Touch “DVD Language”
2. Touch a language you want to read on

the “Select DVD Language” screen and

“Enter”.

If you cannot find a language you want to

read on this screen, touch “Others” and enter

a language code. For the entry of language

code, see page 108.

Summary of Contents for 2002 Land Cruiser






























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands

Toyota 2002 Land Cruiser, Owner'S Manual

Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands