Toyota 2002 Land Cruiser Owner'S Manual Download Page 351

Page: 351 / 414

UN081

When you finish registration of the

marked point, the ”Edit Marked Point”

screen appears. The information shown

depends on the method used to enter the

marked point.

If you want to change the icon or name or en-

ter a telephone number, touch the item to be

edited (on the left side of the screen).

3. Touch the

”OK”

switch.

INFORMATION

Up to 100 marked points can be regis-

tered.

Once a marked point is registered, you

can edit the icon, name or telephone

number.
1. Push the

”MENU”

button on the bez-

el to display the menu screen and touch

the

”Marked Point”

switch

UN082

2. Touch the

”Edit”

switch.

UN083

The screen lists the marked points.
Sort by Mark:

Touch this switch to list the

marked points in order of the type of symbol.

Sort by Date:

Touch this switch to list the

marked points in order of the registered date.

Sort by Name:

Touch this switch to list the

marked points in alphabetical order.

Sort by Dist:

Touch this switch to list the

marked points in order of nearest place from

your current location.
Touch

of the desired marked point to

display the edit marked point screen.

(b) Editing marked points

Summary of Contents for 2002 Land Cruiser






























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands

Toyota 2002 Land Cruiser, Owner'S Manual

Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands