Toyota 2002 Land Cruiser Owner'S Manual Download Page 85

Page: 85 / 414

’02 L/C U (L/O 0108)

ADJUSTMENT OF STEERING WHEEL

TILT
To adjust the tilt of the steering wheel,

push the control switch upward or
downward to set it to the desired posi-

tion.

CAUTION

Do not adjust the steering wheel
while the vehicle is moving. Doing so

may cause the driver to mishandle

the vehicle and an accident may oc-
cur resulting in death or serious inju-

ries.

ADJUSTMENT OF TELESCOPIC STEER-

ING COLUMN
To adjust the steering column length,

push the control switch forward or
backward to set the steering wheel to

the desired position.

When the ignition key is removed, the
steering column moves forward away from

the driver and also tilts up for easy exit

and entry.
When the key is inserted into the ignition

switch,  the  steering  column  returns  to  the
previously  set  position.
This  feature  can  be  set  inoperative.  Ask

your Toyota dealer.

CAUTION

Do not adjust the steering column
while the vehicle is moving. Doing so

may cause the driver to mishandle

the vehicle and an accident may oc-
cur resulting in death or serious inju-

ries.

Power tilt and telescopic steer-

ing wheel

Summary of Contents for 2002 Land Cruiser






























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands

Toyota 2002 Land Cruiser, Owner'S Manual

Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands