Toyota 2002 Land Cruiser Owner'S Manual Download Page 64

Page: 64 / 414

’02 L/C U (L/O 0108)

NOTICE

Do not perform any of the following
changes

without

consulting

your

Toyota dealer. Such changes can

interfere with proper operation of the
SRS airbag system in some cases.

Installation of electronic devices

such as a mobile two

−

way radio,

cassette tape player or compact

disc player

Modification of the suspension sys-

tem

Modification of the front end struc-
ture

Attachment of a grille guard (bull
bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to

the front end

Repairs made on or near the front

fenders, front end structure, con-
sole, steering column, steering

wheel or dashboard near the front

passenger airbag

This SRS airbag system has a service

reminder indicator to inform the driver of
operating problems. If either of the

following conditions occurs, this indicates

a malfunction of the airbags. Contact your
Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

ignition key is turned to the ”ACC” or

”ON” position, or the light remains on.

The light comes on while driving.

In the following cases, contact your Toyota

dealer as soon as possible:

The SRS airbags have been inflated.

The front of the vehicle (shaded in the
illustration) was involved in an accident

that was not severe enough to cause

the SRS airbags to inflate.

The pad section of the steering wheel

front passenger

airbag cover

(shaded in the illustration) is scratched,

cracked, or otherwise damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Summary of Contents for 2002 Land Cruiser






























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands

Toyota 2002 Land Cruiser, Owner'S Manual

Search results

Summary of Contents for 2002 Land Cruiser

Reviews:

Related manuals for 2002 Land Cruiser

Brands by name

Popular brands