TOX PRESSOTECHNIK FinePress PFHL 008.002 Operating Manual Download Page 14

Page: 14 / 34

Pneumatic press PFHL

PFHW

OM 45.PFHL-PFHW.201803.en

Press functioning

The working ram at presses of the series TOX

FinePress PFHL / PFHW is moved out by a hand

lever via a knuckle joint. If the limit switch is

reached at this position, a pneumatic power

stroke of 6 mm is activated after pressing the

start button at the lever grip. After resetting the

lever or releasing the start button, the return

stroke of the ram is initiated.
The pneumatic cylinder is mounted directly to the

press frame.
The piston of the pneumatic cylinder generates

a power which is proportional to the pressure.

The nominal force is reached a the maximum op-

erating pressure of 6 bar. At proportionally de-

creasing force it is, however, possible to operate

the presses up to approx. 3 bar (see compressed

air / press force table).
This press series provides an integrated control

system including maintenance unit.

A ball monorail guidance system with a linear

guided working ram ensures the precise guid-

ance of the tool.
Due to their manifold shifting and adjusting pos-

sibilities, the machines of series TOX

-Fine-

Press can be easily adapted to the desired ap-

plications.

Technical data, machine dimen-

sions and description

The

technical data

can be found in

chapter 1.

Detailed information on

machine

dimensions

, a brief

description

the press series and of the availa-

ble accessories can be found in

type sheet

'TOX

-FinePress'.

5 Transport

Delivery of the machine

The TOX

-toggle press will be delivered ready

for erection. The press must not be dismounted

for transport.
If accessories are also supplied, they must be

mounted during the erection of the press. Please

observe the instructions given in this operating

manual or in instructions delivered separately.
During transport take always care that the TOX

®-

press is appropriately handled. The means of

transport must be designed for the weight of the

press including tool and accessories.

Checking the delivery



Check the delivery for completeness with the

help of the shipping note.



Check the machine for damages during

transport.

Report transport damages imme-

diately

If you detect any transport dam-

ages, advise us immediately on the

kind and extent of damages

(please state number of shipping

note, machine type, and serial

number):
TOX

PRESSOTECHNIK

Riedstraße 4

D - 88250 Weingarten

Tel. +49 (0) 751/5007-0

Fax +49 (0) 751/52391

E-Mail [email protected]

Summary of Contents for FinePress PFHL 008.002



































Search results

Summary of Contents for FinePress PFHL 008.002

Reviews:

Brands by name

Popular brands

TOX PRESSOTECHNIK FinePress PFHL 008.002, Operating Manual

Search results

Summary of Contents for FinePress PFHL 008.002

Reviews:

Brands by name

Popular brands