(Video data quality and file sizes depend on the quality of frame rate settings)
- 10FPS
- 20FPS
- 30FPS
6. Remote Control Settings - Set the remote control function
- Remote control OFF
Selection in this mode: the machine from the controller to control
- Boot and Record video
Selection in this mode: the machine status at shutdown by remote control under the B
button, the machine faster boot (vibrator vibration once) and enter the video mode to record audio
and video camera images, the left video lantern light At the same time, the screen's backlight to
turn off lights, open the lock button function.
A button by remote control, the machine (a vibrator vibration twice) the left side of the video
after the lights went out save by recording just the audio and video camera data to the screen
(video playback) file folder and then shutdown
-Boot and record audio
Selection in this mode: the machine status at shutdown by remote control under the B button, the machine
faster boot (vibrator vibration time) to enter the recording mode to record the local built-in microphone /
external active high-sensitivity microphone to receive all the audio , at the left side of recording when
recording pulse of flashing lights. At the same time, the backlight display lights are switched off, open the lock
button function.
A button by remote control, the machine (a vibrator vibration twice) just after the preservation of audio data
to recording (audio playback) file folder and then shutdown.
Note: not at Slide Switches Slide Switches Q appropriated for state use.
7. Standby video - standby time video settings
- 10 second
