Townsend Labs Sphere L22 Hardware And Software Manual Download Page 15 | Manualshive

Page: 15 / 54

background image

Townsend Labs Sphere L22 Precision Microphone System Guide

Installation and Configuration

15

Hardware

Mono/stereo Usage

To record a source in mono, point the front of the microphone (denoted by the bullseye icon and the
Townsend Labs logo) at the desired sound source.

Figure 2-5

Sphere mic front (left); Sphere mic side (right)

To record a source in stereo, orient the microphone so the double circle icon points towards the sound
source.

Shockmount

To help produce the flattest, most neutral response, the frequency response of the Sphere microphone
extends below 20 Hz. This makes the microphone sensitive to low-frequency interference, such as
floor vibration. When possible, we recommend using the supplied elastic suspension shockmount to
mitigate unwanted low-frequency pickup.

Storage

When the mic will not be used for a prolonged period, it is important to store it in the supplied dust
cover and case. Do not store or use in conditions of extreme temperature and/or humidity.

Phantom Power

The Sphere mic requires 48 V phantom power (P48) in accordance with the IEC 61938 specification.
Do not use with any other types of phantom power.

Townsend Labs logo

Bullseye logo

Double circle logo

«
...
13
14
15
16
17
...
»

Summary of Contents for Sphere L22























































Reviews:

No comments

Related manuals for Sphere L22

Univerge SV8100

Brand: NEC Pages: 2

Univerge SV8100

Brand: NEC Pages: 14

GPS 152 - Marine Receiver

Brand: Garmin Pages: 1

Brand: Electro-Voice Pages: 4

Brand: Garmin Pages: 6

SA10201 - Boom Box Audio System

Brand: Delphi Pages: 12

BLUE-X XBX-300MK

Brand: CanCom Pages: 3

Brand: Audio Technica Pages: 2

Brand: mymyk Pages: 4

Brand: Speco Pages: 2

Brand: Solda Pages: 22

Brand: Hogtunes Pages: 12

Vocally Infinity

Brand: ZYGO Pages: 12

Brand: Standart Horizon Pages: 12

Brand: Tibo Pages: 33

Brand: RCA Pages: 20

Brand: SoundRanger Pages: 5

Brand: Toa Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands