Townsend Labs Sphere L22 Precision Microphone System Guide
Installation and Configuration
12
Instantiation in the Apollo Console
If you connected Sphere to a Universal Audio Apollo recording interface, use the Console application
for monitor and record with Sphere.
To instantiate the Sphere plug-in in the Apollo Console:
1.
Open Console, locate the channel pair connected to the Sphere mic, and confirm that the chan-
nels are linked and 48 V phantom power is enabled.
2.
Select the Townsend Labs Sphere plug-in as the first channel insert (see Figure 2-3 left).
Console allows you to choose whether to monitor or record the Sphere plug-in output.
Figure 2-3
Apollo strip with Sphere as first channel insert, 48V active (left);
UAD REC
button active (right)
3.
Click the
UAD
REC
button to commit the selected microphone settings to disk
during
recording (see
Figure 2-3 right).
- Or -
4.
Click the
UAD
MON
button if you plan to insert the Sphere plug-in in your DAW later.
This lets you change microphone settings after recording.
