1.
Remove side panel securing tabs for both sides in upper fi rebox. (Fig. #102)
2.
Place bottom of side panel in fi rst then tip up into vertical position
(Fig.
#103).
3.
Attach the side panel securing tabs previously removed. Repeat steps 2 & 3
with other side panel.(Fig. #104)
4.
Place porcelain strips as shown in (Fig. #105).
NOTE: Install burner now.
NOTE: The Porcelain strips, that came with your panel set, have a short
fl ange on one long edge. This short fl ange should face in towards the
burners and media.
Fig. #102
Fig. #103
Fig. #105
Fig. #104
RETAINING CLIP
RETAINING CLIP
PORCELAIN STRIPS
53
TCWS.54CSTE 110712-72
Firebox Panels Installation
Summary of Contents for TCWS54ST SERIES D
Page 70: ...70 TCWS 54CSTE 110712 72 ...
