2. Feed the two wires from the right side secondary floor panel down through the left most grommet over the
gas control compartment cover (Figure 3).
3. Insert the other secondary floor panel into the left side of the firebox. As the panel is lowered, feed its two
lights wires into the same grommet as was done with the wires from the right hand floor panel. Also feed
the pilot assembly through the square opening in the panel (Figure 4).
Grommet
Figure 3: Wires through grommet.
Figure 4: Inserting secondary floor panel into the left side.
TCWS.54NGST03D_210417-24
5056.425181D
5
