1. With the control compartment to your left, place one of the two secondary floor panels in the right side
of the firebox (Figure 1) and route the two wires from the lights underneath the plate over to the left hand
side of the firebox (Figure 2).
TCWS.54NGST03D_210417-24
5056.425181D
If converting to propane see “Propane Conversion” on page 13 before proceeding.
Diamond Burner Installation
Figure 1: Inserting secondary floor panel into the right side.
Figure 2: Right hand panel in place with its wires brought out from
under it.
NOTE: For purposes of clarity, the “Front” of the fireplace shall be the side which has
access to the electrical connection compartment cover, the connection to the gas valve and
the side which places the control compartment cover and the coaxial vent located on top of
the fireplace to your left.
4
