3/16” Open for Propane Gas
Figure 22: Shutter gap for propane.
Pilot head
Figure 23: Pilot head.
TCWS.54NGST03D_210417-24
5056.425181D
4. Using a 1/2” wrench, undo the
natural gas burner orifices and
replace with the propane gas
orifices included in the conver-
sion kit. Apply a small amount
of pipe joint compound to the
threads of the propane burner
orifice to ensure a good seal,
before screwing it into the
manifold.
5. Loosen the primary air shutter
screw on each burner, open
the shutter to give a gap of
3/16” and re-tighten (Figure
22).
6. With a 7/16” wrench loosen the
pilot head on the pilot assem-
bly (Figure 23).
Figure 21: Orifice.
14
