8.
Remove the minimum rate screw located
in the valve. (Fig. #21)
9.
Replace the minimum rate screw with the
one provided in the propane conversion
kit supplied with this burner. Ensure that
the screw is fully installed. (Fig. #22)
The minimum rate screw is sealed with
an o-ring. Use a thin bladed screwdriver
to back the screw out to the limit of the
threads.
A groove on the screw body will be
visibe just above the valve body. Insert a
thin tool (knife blade or thin screwdriver
blade) into the groove and gently pry
the screw up.
It helps to rotate the screw while
lifting on it.
Fig #21
Fig #22
Minimum
rate screw
Minimum
rate screw
12
TC42.NG03C 020511-20
Summary of Contents for TC42.NG03C
Page 18: ...18 TC42 NG03C 020511 20 ...
Page 19: ...19 TC42 NG03C 020511 20 ...